Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - sigabort

Pages: [1] 2
1
Gridlock 2 / Beta - Non-working monome apps
« on: August 02, 2017, 05:32:00 PM »
Please add non-working monome apps to this list as replies - I'll gather them up into a single post

2
Gridlock 2 / Beta - Working monome apps
« on: August 02, 2017, 05:31:38 PM »
Please add working monome apps to this list as replies - I'll gather them up into a single post

3
Gridlock 2 / Additional Controllers
« on: July 24, 2017, 03:40:05 PM »
Hi, any additional controllers people would like to see supported?

Maschine Jam will be released in a 0.3.913 update soon along with a few bug fixes.

Any other suggestions?

4
Gridlock 2 / Gridlock 2
« on: July 24, 2017, 03:34:15 PM »
Hi all, development is in progress - I'd like to hear what you like/dislike from G1 and let's see what we can do to improve before I get too far into the dev of G2.

This will be a fairly length development so am not intending to release till end of year, but betas for some of the functionality will start rolling out in a few weeks time.

So, let's hear what you have to say - I'm really open to what input you can provide so let's get the discussions going!

If you start a topic, please indicate at the beginning what area is refers to, e.g. UI, Configuration, Feature Request etc. thx

Cheers

5
Announcements / Gridlock 0.3.913a full - 27/07/17
« on: May 19, 2016, 09:00:51 PM »
Changes from 0.3.913:
Fixed arc/builtin rotary option not available on Push2
Fixed issue with not being able to set bottom 5 rows of monome shift grid to send out messages
Fixed issue with not being able to save Push2 configs in Live
Fixed config issue where only the last edited bank for a controller type was saved
Fixed issue with Monome control type not appearing in Entry edition
LaunchPad MK2 and Launchpad Pro no longer need custom scripts in Live

Changes from 0.3.912:

Controllers
Added support for Maschine Jam
In Live, removed the requirement to run custom scripts for the most part (version 1 Launchpad is still advised to use it). Please let me know if you have a controller that doesn't work with the stock script

Monome
Updated VSerialOSC to version 3 - please use the new files in the serialosc3 folder. This should additionally remove the requirement for the custom monome_sum package and the
standard one should now work fine

Fixes
Various fixes

Changes from 0.3.911a:

General
Added NRPN support
M4L-Midi has been replaced with native version that no longer requires Java
Each controller now has up to 8 MIDI targets configurable in the 'IO' section, meaning that each individual control can reference 1 of 8 different MIDI devices - input is still currently restricted to 1 device - new combo box in the "Press" config screen sets this.
Slight modification to controller initialisation on loading saved settings - should hopefully be a bit more consistent

Controllers
LCXL now tracks Live whilst not activated - this means that the pick-up indicators are correctly set after switching out of Gridlock into Live and back again.

Live
Inclusion of new Live device for sending out Tempo & SPP over UDP rather than using MIDI for syncing to standalone

Main Fixes
Fixed some issues with LCXL
Fixed problems sending rotary config
Fixed issue for momentary values not being set on certain buttons
Fixed some issues with text update for HUD/Lemur
Fixed Gridlink setup issue
Fixed issue with standalone Push2 processing
Other minor fixes

6
Announcements / Beta Testers for VST TB-3 Editor
« on: March 30, 2016, 11:20:13 PM »
Hi, looking for beta testers for a VST version of the TB-3 M4L editor.

Reply to this post if you're interested.

Thanks

7
Announcements / Gridlock 0.3.911a entry/standard/full - 10/02/16
« on: February 09, 2016, 11:03:46 AM »
Changes from 0.3.911:
Re-enabled use of standard Launchpad script in Live
Tweaked the de-activation sequence for Launchpad family in Live
Fixed an issue not allowing config screen to be opened

Changes from 0.3.91:

General
New button handling code
New group handling code
Internal changes to support drum/melodic sequencer and configurable control types (0.3.92)
Internal changes to support 32 buttons (0.3.92)
Internal changes to support direct Live mapping (0.3.92)
Virtual devices no longer show by default, there is a checkbox to display them
Updated de-activation sequence for Launchpad family to free up additional buttons
Moved primary development to Max 7

Arc
Fixed couple of arc display issues
Added scaling factor to push arc implementation controlled by encoder 9

Performance Enhancements
Improved creation speed of each controller instance, particularly when creating multiple instances
HUD grid replaced with new grid - less CPU and faster updates
Number of additional optimisations for resource usage

Controllers
Added support for Launchpad Pro
Added support for Launchpad MkII
Added support for Push 2

9
Announcements / Gridlock 0.3.91 standard/full - 13/04/15
« on: April 13, 2015, 06:35:02 PM »
Hi all,

Changes from 0.3.9:

All updates to 0.3.54c-d/0.3.9c-d
All updates docmented for 0.3.55 at http://forum.sigabort.co/index.php?topic=228.0

Controllers
APC40-II support

Ableton Live
Added Gridlock_APC40II remote script

General
Full colour support for RGB capable controllers (Push/Lemur/APC40II) - Lemur is defaulted currently but will have configuration (0.3.91x)
Colour cycles - these allow buttons to be animated, e.g. glowing effects
6/8 banks added for control types - normal press = banks 1-4, double press = banks 5-6(8)
Full velocity support for controllers with vleocity

Lemur
Lemur 1.7 script allowing keypad/drumpad selection

Controls
1st release of keypad control type (Push style)
1st release of drumpad control type

Monome
Increase to 14 apps for full version


10
Announcements / Lemur 0.1.6 - 31/03/15
« on: March 31, 2015, 08:26:24 PM »
Hi all, latest Lemur template uploaded for download from sigabort.co/gridlock

11
Announcements / Gridlock 0.3.55a/0.3.91a monome - 13/04/15
« on: March 30, 2015, 10:41:04 AM »
Hello all, I'm happy to announce the availability of Gridlock 0.3.55a and 0.3.91a monome for download

Changes from 0.3.55a:
Fixed issue with text not displaying on Push in Live
Not restoring rotary config properly
Arc enable/disable now available from monome shift config
Other minor fixes

Changes from 0.3.54/0.3.9:

Ableton Live
Added Gridlock_Push remote script
Updates to Gridlock MIDI In/Out devices - now possible to filter by bank number

Lemur
Lemur 1.6 script adding slider to rotary/XY controls and providing RGB support

Controls
New button types:
 2 way, 3 way
 "Has Off" flag added for 2way, 3way, 4way
Dual mode now available for sliders and bends
Double mode now availalbe for sliders, bends and XY

Monome
New config screen - allows only required resources to be used. Also improved load times
VSerialOSC apps now autoconnect on loading through Gridlock
Updates VSerialOSC to oct 2014 version - this can be used as a direct replacement for Max 7

Push
Arc now natively supported - encoders can be used to control up to 8 arc controls

Repeater
Updates to repeater module:
 Can provide "humanise" %age where velocity will be adjusted every now and then
 Can provide "ramp" %age to adjust the velocity by a %age at each repeat

Config
New config screen - more expandable and improved load times
Easier selection and configuration
Copying of instances

General
Lots of work to reduce resource/memory usage
Humanise added to fixed velocity hits
'Scan' button added for rescanning MIDI devices

Various other fixes/enhancements along the way

Downloads available from sigabort.co/gridlock

12
Tutorials & Videos / Videos found elsewhere on the site
« on: December 18, 2014, 04:51:30 PM »
Standalone Live Mode (SLM)
http://youtu.be/_lHlfiaUKVU

MIDI Mapping in Live
http://youtu.be/BeF30gyncFM

API Part 1 - Updating the Grid
http://youtu.be/1utcaMpwBk4

13
Tutorials & Videos / Using Gridlock with Lemur and TouchOSC
« on: December 05, 2014, 08:41:29 PM »
Hi, here's a video on configuration of Gridlock for use with a tablet.

http://youtu.be/p7wBpbTUd4M

Cheers

14
Announcements / Support
« on: December 01, 2014, 10:36:41 PM »
Hi all, moving forward support for Gridlock 0.3.54 and Gridlock 0.3.9 monome will be available on the forum only - I monitor the forum regularly so this will still be prompt and also gives others a chance to help you out and builds up a repository of knowledge.

Gridlock 0.3.9 standard and full purchasers are still encouraged to use the forums for the same reasons above, but can also contact me at gridlock@sigabort.co

Cheers

15
Hi all, here's a vid on using the MIDI In and MIDI Out devices included with 0.3.54 and 0.3.9.

http://youtu.be/R4uonAnaAnM

I'll attach the set and the controller config once I've done the release.

Similar patches will also be available for Max for routing MIDI in the same way.

Have fun!

Pages: [1] 2